Just in case …
What you see on the
LCD
What it means/What to do
Macro In Use
You tried to change the function for a Soft key,
but that Soft key has been programmed in a
Macro key. You cannot change the Soft key func-
tion until erase the Macro key that contains the
Soft key you want to change. Erase the Macro
key, then try again.
Memory Overflow
During transmission (or copying), you tried to
Start Or Cancel
enter more pages into memory than your fax
could store. Press
START
to tell your fax to keep
as many pages in memory as possible, or press
CANCEL
to delete from memory all pages stored
during this operation (but not previous opera-
tions).
Mirror Carriage Error
The mirror carriage of your machine has become
inoperable. Call your authorized Olympia dealer.
Mirror Locked
The transport mode is not turned off.
Turn off the transport mode (see pages 1.5, 1.8).
No Command
You pressed
REVIEW COMMANDS
to review
upcoming commands, but your fax machine had
none stored.
No Department Code
You tried to turn on the department code setting
but there are no department codes stored in
your fax machine. Store at least one department
code, then try again.
. . . or . . .
You entered incorrect department code at fax
sending while the department feature is on.
Enter correct department code.
No Document Stored
You tried to print a document from memory, but
your fax machine had none stored.
No Drum
The drum cartridge is missing or has not been
properly installed in your fax machine.
Please properly install the drum cartridge.
No Number Stored
You selected an autodialer, batch box or F-Code
box number for which there is no fax (or phone)
number programmed. Either choose another
number or dial a phone number directly from the
numeric keypad.
What you see on the
LCD
What it means/What to do
No Passcode
You tried to program a security feature (see
pages 3.50–3.57), but there’s no protection pass-
code stored in your fax machine. Store a
protection passcode in your machine, then retry
again.
No PIN Number
You selected “Mode1” in the
PIN
mask feature
and tried to call an autodialer number in which
no PIN has been entered, or to call using
numeric keypad without
PIN
. Enter a
PIN
, then
try again.
No Report
You requested an activity journal or confirma-
tion report, but your fax machine has no record
of any fax jobs having occurred.
No Toner Cartridge
The toner cartridge is missing or has not been
properly installed in your fax machine. Please
properly install the toner cartridge.
Not Allowed in Macro
During macro registration, you pressed the key
which cannot be registered in Macro, such as
Monitor/Call key or Security Reception key.
Other Key Setting
You tried to enter the same function which is
already stored in other Soft key.
Store the different function.
Open Top Cover
The paper is jammed in your fax machine.
Please Remove Paper
Open the cover indicated on the LCD, and
Open 1st Side Cover
remove the jammed paper carefully.
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open Top/2-Bin Cover
Please Remove Paper
Remove Bypass Paper
Open&Close Top Cover
Open&Close ScanCover
Either your document wasn’t inserted correctly,
Reset Document
or the fax to which you’re sending can’t handle
the document’s page length. Reset the page and
try again.
Please Call Service
The printer unit of your fax machine has become
inoperable. Call your authorized Olympia dealer.
5.7
Summary of Contents for OM 9812
