Configuration
G
17
Activating the Internal Telephone Dialling Unit with OGM
Function
The internal telephone dialling unit is deactivated if no telephone numbers have been en
tered and saved.
You can enter up to 10 individual telephone or mobile phone numbers of contact persons,
such as relatives, friends or neighbours. In the event of an alarm, the internal telephone
dialling unit dials these phone numbers automatically in the sequence they were entered
(beginning with memory location 0) and communicates the status via the voice messages
assigned to the respective sensors. In the case of an "engaged" signal or no connection is
possible, the next phone number is automatically dialled. A total of three dialling cycles are
completed!
The internal telephone dialling unit is deactivated when a subscriber called answers the call
made and presses the numeric key
[1]
on his telephone or 3 dialling cycles have been
completed.
NOTE: Save as many phone numbers as possible. This increas
es the probability of reaching a contact person in the
event an alarm is triggered. If, for example, you only save
two phone numbers and both are engaged when the
alarm call is sent, the dialling cycle soon comes to an
end!
NOTE: Do not forget to inform the contact persons that they will
be called by your alarm system automatically if an alarm
is triggered and agree on a sequence of actions if the
alarm is triggered.
Memory locations 0-9 (buttons
to
) are available to enter up to 10 phone
numbers. Each phone number can be composed of up to 24 characters/digits. In addition, a
name with up to 13 characters/letters can be assigned to each phone number.
NOTE: Do not use the official emergency call numbers (e.g. 112)!
NOTE: Unjustified requests for police, fire and rescue services
are liable for costs!
Save the phone numbers as follows:
1. Enter the Entry Code. Confirm it by pressing
.
2. Press the
button.
Location Key
appears in the display.
3. Select a memory location (button
-
). If you have not yet stored a
phone number,
Empty
appears as information in the display. Confirm it by press
ing
.
4. Enter the phone number including the access code. Confirm it by pressing
.
5. Enter the name associated with the phone number. Confirm it by pressing
.
6. Press
to exit from the menu.
