background image

Resetting the Factory Settings (RESET)

G

25

Key

Function

[1]

Activate the handsfree function

[2]

Activate the screening function (in the room)

[3]

Activate Alarm mode

[4]

Activate At Home mode

[5]

Activate Silent mode

[6]

Activate Disarmed mode

[#]

End the handsfree or screening function

[#], [#]

End remote access via telephone facility

6. Remote access to your alarm system is interrupted when you press the 

 [#] 

button

twice on your telephone.

Resetting the Factory Settings (RESET)

NOTE: Please note that when carrying out a RESET, all the user

settings are deleted. The registration of the sensors is
retained! After a RESET has been executed, the 4-digit
Entry Code is 1-2-3-4!

Proceed as follows to reset the factory settings on the wireless alarm system:

1. Use a screwdriver to loosen the screw in the battery and connection socket compart­

ment on the underside of the base unit.

2. Press the RESET button. The alarm system acknowledges a RESET by means of

an acoustic signal.

3. Close the battery and connection socket compartment and tighten the screw.

Summary of Contents for Protect 6 Series































Reviews: