Olympia PS 30, Manual Instruction

Problem Cause 

Remedy 

Device does not 
work after lengthy 
operation or 
stops during 
operation 

Was the device in constant 
operation for some time? 
Is the surface of the device 
warm? 

Pull out the mains plug from the 
socket and allow the motor to cool 
down to room temperature. 

Paper jam 

Have you inserted more 
than 6 sheets of paper (70 
g/m²)? 
Has the paper not been 
inserted straight in the in-
feed slot? 

Set the sliding switch to REV to 
push back the paper. Switch the 
device to AUTO again to shred the 
paper remaining in the cutting unit. 

If you cannot rectify the fault yourself, contact your dealer or call the Olympia hotline. 

Guarantee 

ATTENTION! 

INPORTANT GUARANTEE DOCUMENTS 

PLEASE STORE IN A SAFE PLACE. 

Dear Customer, 

Thank you for buying a quality product from 

. In the unlikely event that 

the device should develop a technical problem please observe the following 
points:

¾

  The guarantee period for the device is 24 months. 

¾

  Make sure that you store the purchasing receipt and the original packaging. 

¾

  Should a problem occur, please call our hotline first: 

+ 49 (0) 180/500 7514 

(Fee for connections outside Germany: additional Euro 0.12  

per call for the connection within Germany.)

Our personnel are often able to provide helpful advice over the phone. 

¾

  If it is not possible to clear up the problem over the phone, please send the 

device back to the following address: 

Service-Center Hattingen 
Weg zum Wasserwerk 10 

45525 Hattingen, Germany 

Guarantee repairs will only be performed if the purchase receipt is enclosed with 
the device. 
Thank you for your understanding. 

Yours faithfully, 

Your Olympia Business Systems partner 

 
PS-30 
Destructeur de documents automatique 

MODE D’EMPLOI 

[FRANCAIS] 

12.2005