20
8 Clearing
Material
Jams
If too much material (paper, CDs, credit cards) is fed to the cutting mechanism at one
time, the material jams. The
OVERLOAD
warning lamp lights up and an acoustic alarm
is issued. The motor switches to reverse and it should be possible for the user to pull the
the paper directly out of the infeed, using a little force if necessary. The motor then stops.
If there is still material in the infeed, proceed as follows:
Ɣ
Press and hold the
REV
button and allow the material to be ejected out of the
machine in reverse mode.
Ɣ
Press and hold the
FWD
button and allow the material to be removed from the
machine in forward mode.
Ɣ
If necessary, remove any residual material manually from the automatic paper infeed.
Ɣ
The machine then reverts to
AUTO
mode.
Ɣ
Reduce the quantity of material being fed into the shredder.
8.1
REV button (reverse operation)
Press and hold the
REV
button so that the cutting mechanism runs in reverse and the
material is released.
8.2
FWD button (forward operation)
Press and hold the
FWD
button to run the cutting mechanism forwards to shred any
residual material left in the infeed and remove it from the cutting mechanism.
Note:
The
FWD
button is used after clearing a material jam to start the cutting
mechanism running without feeding any new material through the respec-
tive infeed.
8.3
Removing residual paper from the automatic paper
infeed
10. Set the On/Off switch to its
OFF
position and disconnect the power plug from the
power socket.
11. Unlock the automatic paper infeed by setting the safety knob to its
OPEN
position.
12. Hinge up the safety guard on the automatic paper infeed.
13. Remove any jammed paper carefully from the cutting mechanism using a suitable
tool.
14. Hinge the safety guard on the automatic paper infeed back down.
15. Lock the safety guard of the automatic paper infeed by sliding the safety knob to its
LOCK
position.
16. Reconnect the power plug in the power socket and set the On/Off switch to
ON
.
Summary of Contents for PS 710.3 CCD
