FC10 — INSTALLATION INSTRUCTIONS
800-525-0954 | www.olympuslock.com | info@olympuslock.com
Page 2
7. You are now able to cycle test the lock for the correct
function. The last step will be to install the connecting link
between the cam and the file cabinet gang bar. The small
hook of the link is inserted into the hole in the cam and the
tab end inserted into the hole provided in the bar. To hold the
link in place the tab must be bent up at an approximate 45
degree angle using a screwdriver.
(Fig. 10)
Figure 10
Figure 11 (locked)
Figure 12 (unlocked)
8. The lock is now completely
installed. The file cabinet
is locked with the cam and
gang bar raised to the up
position.
(Figs. 11 & 12)
