3
Usi
n
g l
ive
vi
ew
42
EN
1
If the camera detects a face, a frame will be
displayed in that location.
• When you press the shutter button, the camera will focus
on the position of the face detection frame (however, if a
single AF target is selected with
[AF AREA]
, the camera
will focus on the AF target selected).
• With
[AF SENSOR]
or
[HYBRID AF]
, the camera will
focus on the AF target that is closest to the face detection
frame.
x
Notes
• During sequential shooting, face detection will work only at the first shot.
• Depending on the subject, the camera may not be able to correctly detect the face.
During live view, you can take a picture focusing manually while checking the focus on the LCD
monitor.
1
Set the AF mode to [S-AF+MF] or [MF].
g
“AF mode selection” (P. 54)
2
Adjust the focus by rotating the focus ring.
• In
[S-AF+MF]
mode, after pressing the shutter button halfway or pressing the
AEL
/
AFL
button, you can rotate the focus ring to finely adjust the focus before taking the picture.
• Using the enlarged display can be very convenient when adjusting the focus manually.
g
“Enlarged display operation” (P. 43)
You can switch the information displayed on the monitor by pressing
INFO
button repeatedly.
Taking a picture using manual focus
Switching the information display
250
250
F5.6
F5.6
38
38
L N
N
250
250
250
F5.6
F5.6
38
38
L N
N
250
250
F5.6
F5.6
38
38
250
250
F5.6
F5.6
38
38
250
250
F5.6
F5.6
38
38
Information display
on
Information display on
+ Ruled lines display
(
g
P. 92)
Information display on
+ Histogram
Enlarged display
(
g
P. 43)
Information display
off
GO
WB/
F
+0.7
+0.7
+1.0
+1.0
0.0
0.0
+0.3
+0.3
Comparison screen
(
g
P. 43)
