background image

33

General information for reprocessing

7 General information for reprocessing

This chapter gives a general overview of the reprocessing cycle 

and the compatible reprocessing methods for the product.

The product is delivered in unsterile condition. Reprocess the 

product before first and each subsequent use.

WARNING

Risk of injury to the patient and the medical personnel

Improper or incomplete reprocessing can cause infection of the 

patient and medical personnel as well as damage to the product.

 

● Reprocess the product before first and each subsequent 

use.

 

Reprocess the product according to the instructions in this 

chapter.

 

Only use reprocessing methods which have been validated 

for the product.

 

Only use detergents which have been validated for the 

product.

 

● Avoid any protein fixation prior to or during cleaning caused 

by the reprocessing process.

WARNING

Risk of injury to the user

Patient debris and reprocessing chemicals are hazardous. There 

is a risk of infection or skin irritation when they come into contact 

with exposed skin.

 

Wear personal protective equipment to guard against 

dangerous chemicals and potentially infectious material in 

accordance with the applicable local guidelines.

7.1 Overview of the reprocessing cycle

This overview describes a complete reprocessing cycle. Users 

can select a validated reprocessing method for every phase of 

the reprocessing cycle.

Summary of Contents for A00010A













































































Reviews: