Olympus BondMaster 600 User Manual Download

Page: 208 / 248

DMTA-10045-01EN, Rev. E, August 2016

Chapter 7

198

To delete a file on the BondMaster 600

In the

Manage File

dialog box, choose the file to be deleted, and then click

Delete

(see Figure 7-17 on page 197).
The

Confirmation

dialog box appears, asking you to confirm that you want to

delete the file on the device (see Figure 7-18 on page 198).

Click

Yes

to confirm file deletion.

OR
Click

to cancel the file deletion.

If you click

Yes

to confirm file deletion in the

Confirmation

dialog box, the file is

permanently deleted, and it cannot be retrieved.

Figure 7

‑

18 The Confirmation dialog box for file deletion

To rename a file on the BondMaster 600

In the

Manage File

dialog box, choose the file to be renamed, and then click

Rename

(see Figure 7-17 on page 197).

The

Rename

dialog box opens (see Figure 7-19 on page 199).

NOTE

Summary of Contents for BondMaster 600

























































































































































































































































Search results

Summary of Contents for BondMaster 600

Reviews:

Related manuals for BondMaster 600

Brands by name

Popular brands

Olympus BondMaster 600, User Manual

Search results

Summary of Contents for BondMaster 600

Reviews:

Related manuals for BondMaster 600

Brands by name

Popular brands