19
BX3M-CB/CBFM
: Turns ON. : Blinks. :Turns OFF. : Varies depending on state.
Phenomena
Cause
Remedy
Page
Number
of beeps
CB
HS
MIX
b) When the button of the hand switch for motorized nosepiece (BX3M-HSRE) is pressed, the motorized nosepiece rotates,
but it does not reach the specified hole.
5 times
–
–
The setting of the
dip switch is not
correct.
Set the main switch to (OFF),
and use the dip switch on the side
of the control box (BX3M-CBFM
or BX3M-CB) to set the number of
objective mounting holes on the
nosepiece.
9, 33
The motorized
nosepiece did not
reach the click
position within the
specified time.
The motorized
nosepiece is
damaged.
Set the main switch to (OFF)
and check that there is no obstacle
when the nosepiece rotates.
If the nosepiece contacts with the
obstacle, remove the obstacle.
Then, set the main switch to (ON).
If the same phenomena still occurs,
contact Olympus.
9
