40
4-5 Reflected light infrared observation procedures
·
Combining the reflected polarizer slider for IR and the
rotatable analyzer slider for IR (U-POIR, U-AN360IR) cuts
the reflection to the sample surface to acquire the image
with the higher resolution.
·
Using the correction collar mechanism of the objective
reduces the aberration to acquire the bright image with the
high resolution.
NOTE
Start observation.
Brightfield/darkfield selector knob of the
reflected light illuminator
(page 16)
Coarse / Fine focusing knob of the BXFM
frame
(page 20)
Insert the band-pass filters for IR
(U-BP1100IR, U-BP1200IR, U-25).
4
Turn ON the main switch.
1
Filter insertion slot of the reflected light
illuminator
(page 34)
Main switch of power supply
(page 16)
Light path selection lever of the trinocular
tube
(page 18)
Nosepiece
(page 19)
Nosepiece
(page 19)
Coarse / Fine focusing knob of the BXFM
frame
(page 20)
Select the brightfield observation.
2
Bring the sample top surface into focus
with the visible wavelength.
3
Change to the camera light path
5
Engage the objective with the
magnification to use in the light path.
6
Bring the sample into focus.
7
Summary of Contents for BXFM
Page 6: ......
Page 19: ...13 BXFM MEMO ...