6
Windo
ws
CONNECTING YOUR CAMERA TO THE PC
1
Insert the connector on one end of the USB cable into
the USB port of the PC.
Note
The position of the USB port varies depending on the PC. Refer
to the operation manual for the PC.
2
Make sure that the lens barrier of the camera is closed.
3
Open the connector cover on
the camera.
4
Insert the connector on the
other end of the USB cable
into the USB connector on the
camera.
5
The green lamp lights.
The camera is now connected to the
PC.
Caution
All buttons on the camera are ignored when it is connected to
the PC.
This mark is engraved
on the connector
Connector
USB port
Green lamp (lights)
Connector cover
Connector
USB
connector
Summary of Contents for CAMEDIA C-100
Page 22: ......