No.
Parts name
Screw
Grease Adhesive
Remark
COVER
(A)
(B)
(C)
(D)
FOCUSING GUIDE
COVER
(F)
ROLLER
CASHING
(I)
(M)
CASING
(H)
ROLLER
(J)
WIRE GUIDE
NOSEPIECE
(G)
GUIDE
MOUNT ASS’Y
OT2010
OT2010
Mount the rack while pushing it
UNIT
WIRE GUIDE
Attach it with double coated
adhesive tape.
Fit the protrutions into the holes
of frame.
Mount it while pushing it to front
and left directions.
(Refer to the figure on C-9.)
Press it down to adjust the
working force, and fix it.
Check item
working force: 0.2N - 0.5N
Movement: without play or
(OT3225)
tightness
Check the sliding surface of wire
guide. If there is a dent on it,
replace the wire guide.
Grease: applied part:
each groove attached wire guide,
sliding surface of wire guide
(E)
Apply grease to rollers.
*Apply adhesive to fixing screws.
in the arrow directions when
replaced.
(Refer to the figure on C-11.)
Apply grease to rollers.
OT2010
OT2010
Arrange the rollers alternately.
OT1838
Arrange the rollers alternately.
(K)
WIRE GUIDE
Same as the above
(L)
Same as the above
WIRE GUIDE
Same as the above
OT2010
OT2010
OT2010
OT2010
CUKK3X6SA, 1pc. (*1)
AB4X14SA, 3pcs. (*2)
CUKSK2.6X10SA, 4pcs. (*3)
AB3X12SA, 5pcs. (*4)
KNW3SA, 5pcs. (*5)
CKX31/CKX41
C. DISASSEMBLY AND ASSEMBLY PROCEDURES
C-12
OT2010
