E-6
Handling the Product
●
Do not use or store the unit in places such as listed below:
Doing so may cause malfunctions, defects, damage, fire, internal
clouding, or water leakage.
Areas exposed to direct sunlight and high temperatures (e.g. in a
car, on the beach, etc.)
Areas exposed to fire or overheating.
Water depths in excess of 3 meters.
Areas exposed to strong vibrations
Areas exposed to excessive temperatures or humidity.
Areas exposed to extreme temperature changes.
Areas exposed to organic solvents and corrosive gas.
●
This product is made of polycarbonate resin with high impact resistance,
but it could be damaged by scraping against rocks or other hard objects.
Striking or dropping it against a hard object may also break it.
●
This product its not designed to absorb impacts and protect the
camera inside. When this product is subjected to strong impacts or
when heavy objects are placed on it, the digital camera inside may
be damaged. Please handle with care.
●
When this product is not used for a long time, the waterproof
packing and other parts may deteriorate, leading to a decline in
water resistant performance. Before use, always perform the
preliminary test and the final check.
●
When a flash is used, shadows may appear at the edges of the
picture. This is especially noticeable when taking wide-angle
pictures in the macro mode. Check the image before using the flash.
●
Do not use the following chemicals for cleaning, corrosion
prevention, prevention of fogging, repair or other purposes.
Applying any of these to the product directly or indirectly (with the
chemicals in vaporized state) may cause cracking under high
pressure or other problems.
Chemicals which cannot be used Explanation
Volatile organic solvents,
chemical detergents
Do not clean the product with alcohol, gasoline,
thinner or other volatile organic solvents or with
chemical detergents etc. Pure lukewarm water is
sufficient.
Anticorrosion agent
Do not use anticorrosion agents. The metal parts
use stainless steel or brass, and washing with
pure water is sufficient.
Adhesive
Do not use adhesive for repairs or other purposes.
When repair is required, please contact your
dealer or nearest Olympus Service Station.
