12
Bottom side
of SmartMedia
projecting from
the slot
Inserting and Ejecting SmartMedia cards
1
Insert the SmartMedia in the correct direction.
Push the SmartMedia card fully into position.
2
Set the
POWER/LOCK
switch to
ON
.
The display appears.
Inserting SmartMedia cards
Insert the SmartMedia card into the slot as shown below.
Inserting and Ejecting SmartMedia cards
1
2
POW
ER
/LOCK
ON
OFF
MENU
INDEX/EQ
REC
STOP
ERASE
contact
area
...............................................................................................................................................
Notes
• If an unformatted SmartMedia card is inserted, “FORMAT YES?” will display automatically. Format the
SmartMedia card (
→
P.55).
• Never use any SmartMedia card other than one that has been formatted on this unit or on a CAMEDIA
series Olympus digital camera (
→
P.55).
SmartMedia not inserted
fully into the slot
When you set the POWER/LOCK
switch to the ON position, “INSERT
CARD” flashes on the display for several
seconds. Pressing any button with no
SmartMedia card inserted causes
“INSERT CARD” to appear again.
Push the SmartMedia card fully into
position.
SmartMedia inserted fully
into the slot
When you set the POWER/LOCK
switch to the ON position, “PLEASE
WAIT” flashes on the display for
several seconds.