6
1
EN
• The LED light will light up then power will
be turned on and the display will turn on
showing the OLYMPUS logo.
Turning on the power
While the recorder is turned off,
slide the
POWER/HOLD
switch in the
direction indicated by the arrow for
2 seconds or longer.
Turning on/off the power
When the recorder is not being used, turn
the power off to reduce battery consumption
to a minimum. Even if the power is turned
off, existing data, mode settings, and clock
settings will be maintained.
Power supply
Turning off the power
Slide the
POWER/HOLD
switch in the
direction indicated by the arrow for
1 seconds or longer.
• The display shuts off, and the power will
be turned off.
Auto Power off mode
If the recorder is on and stops for 10 minutes
or longer (default setting), the recorder enters
Auto Power off mode and turns off the power.
You can set the time to enter power save
mode from among [
5minutes
], [
10minutes
],
[
30minutes
], [
1hour
], [
2hour
], [
3hour
] and
[
Off
] (
☞
P.77).
To exit Auto Power off mode , turn on the
power again.
Po
w
er s
up
ply
