41
2
EN
Re
co
rd
in
g
• Stop recording and the file that was just
recorded will be played back.
Pause
While the recorder is during recording
mode, press the
REC
button.
• The recorder will time out after 120
minutes when left in “Rec Pause”.
Resume Recording:
Press the
REC
button again.
• Recording will resume at the point of
interruption.
To quickly check on the recorded contents
While the recorder is during
recording mode, press the
`
OK
button.
Notes
• When a microSD card is inserted in the
recorder, be sure to confirm the recording
media as either [
Built-in
] or [
microSD
] so
that there is no mistake (
☞
P.77).
• If the
REC
button is pressed when a
function other than the record function is
specified, [
Cannot record in this folder
]
is displayed. Select a folder from [
Folder
A
] through [
Folder E
] and start recording
again.
• To ensure recording from the beginning,
start speaking after you see the LED indicator
light on.
• When remaining recording time is less
than 60 seconds, the LED indicator light
starts flashing. When the recording time
is decreasing to 30 or 10 seconds, the light
flashes faster.
• When [
Folder Full
] appears, the recorder
will not be able to record anymore. Delete
any unnecessary files before recording any
further (
☞
P.60).
• Recorder will not be able to record
anymore when [
Memory Full
] appears.
Delete any unnecessary files before
recording any further (
☞
P.60).
• We recommend formatting the record
media in the recorder before recording
(
☞
P.94).
Recording
