1
Inserting and Ejecting a microSD card
2
Face the microSD card the correct
way and insert it into the card
slot as shown in the diagram.
The "microSD" indicated in the instruction
manual refers to both microSD and
microSDHC.
This recorder can be used with commercially
available microSD cards as well as the built-
in memory.
Inserting a microSD card
1
While the recorder is during stop
mode, open the card cover.
• Insert the microSD card keeping it
straight.
• The microSD card stops with a click
when it is inserted all the way.
• Inserting the microSD card the wrong
way or at an angle could damage the
contact area or cause the microSD
card to jam.
• If the microSD card is not inserted all
the way, data may not be written to
the microSD card.
3
Close the card cover securely.
• When you insert the microSD card,
the recording media changeover
display will appear.
4
When you are recording to a
microSD card, press the
+
or
−
button and select [Yes].
5
Press the
OK
button to complete
the setting.
Notes
• It is possible to switch the recording media
over to the built-in memory (
☞
P.54).
• In some cases microSD card which have
been formatted (initialized) by another
device, such as a computer, cannot be
recognized. Be sure to format them with
this recorder before using (
☞
P.71).
In
se
rti
ng a
nd E
je
cti
ng a m
icr
oS
D c
ard