6
Troubleshooting
75
EN
Problem
Possible cause
Solution
The display is blank.
The battery is not inserted
properly.
Check that the positive and negative
terminals of the battery are placed
correctly (
☞
P.8).
The remaining battery power
is low.
Replace or charge the battery (
☞
P.8,
P.11).
The power is OFF.
Turn the power ON (
☞
P.9).
Unable to operate the
voice recorder.
The remaining battery power
is low.
Replace or charge the battery (
☞
P.8,
P.11).
The power is OFF.
Turn the power ON (
☞
P.9).
The voice recorder is in HOLD
mode.
Release HOLD mode (
☞
P.18).
Unable to record.
There is no remaining memory.
Erase unneeded files (
☞
P.36).
The maximum number of
recordable files has been reached. Select another folder (
☞
P.20).
Playback is inaudible.
The earphones are connected to
the earphone jack.
To output the playback through the built-
in speaker, disconnect the earphones.
The volume is set to [
00
].
Adjust the volume (
☞
P.30).
The recording is too
quiet.
A low recording level has been
set.
Redo recording after setting the recording
level to [
High
] or [
Middle
] (
☞
P.40).
The output level of the connected
external device may be too low.
Adjust the output level of the external
device.
Audio file sound is
distorted.
The voice recorder’s recording
level, or the output level of the
connected external device may
be too high.
If the problem continues after setting the
voice recorder’s recording level to [
Auto
]
(
☞
P.40), adjust the output level of the
external device.
An audio file is not
recorded in stereo.
The connected external
microphone is a mono
microphone.
Sound recorded by a connected external
mono microphone is recorded on the left
channel only.
[
Rec Mode
] is set to a mono
recording format.
Set [
Rec Mode
] to a stereo recording
format (
☞
P.40).
A positive (+) value has been
selected for [
Zoom Mic
].
Select [
Off
] for [
Zoom Mic
] (
☞
P.41).
Troubleshooting