18
1
• You can choose the order of the year, month,
day by pressing the F2(D/M/Y or Y/M/D or M/
D/Y)* button while setting them.
Example: October 14, 2008
(Initial setting)
*The display will vary depending on the status of the
settings.
3
Press the
PLAY/OK
button to complete
the setup screen.
The clock will start from the set date and time.
Press the PLAY/OK button according to the time
signal.
Changing the Time and Date
When the recorder’s POWER/HOLD switch is
turned ON the [Time & Date] will be displayed
for two seconds. If the time and date is not
correct, set it using the procedure below.
1
Press the
+
or
–
button in the [Device
Menu] screen, then select [Time & Date].
See P.34 regarding the menu.
2
Press the
PLAY/OK
or
9
button.
The time and date screen appears. The hour
indicator flashes, indicating the start of the time
and date setup process.The following steps are
the same as Step 1 through Step 3 of “Setting
Time and Date (Time & Date)” (
☞
P.17).
3
Press the
F3
(
EXIT
) or
0
button to
complete the setting.
Setting T
ime and Date
10
M
14
D
2008
Y
14
D
10
M
2008
Y
2008
Y
10
M
14
D
BACK
EXIT
Device Menu
Beep
12
Power Save
Time & Date
USB Class
Reset Settings
Format
Setting Time and Date (Time & Date)
Notes
• If you press the STOP button during the setup operation,
the settings are cancelled, and the recorder returns to the
previous screen.
• You can set the time and date from your PC using DSS
Player software (
☞
P.50).
