16
1
Set the recorder to HOLD mode
Slide the
POWER
/
HOLD
switch
to the HOLD position.
After “Hold” appears on the display, the
recorder is set to HOLD mode.
Exit HOLD mode
Slide the
POWER
/
HOLD
switch
to the
A
position.
HOLD
If you bring the POWER/HOLD switch to the HOLD position,
the current conditions will be preserved, and all buttons and
switches will be disabled.This feature is useful when the
recorder has to be carried in a bag or pocket.
..................................................................................................................................................
Notes
•
If you press any button in HOLD mode, the clock display flashes for 2 seconds, but it will not operate the
recorder.
•
If HOLD is applied during playback (recording), operation is disabled with the playback (recording) state
unchanged. (When playback has ended and the recording has ended due to the remaining memory
being used up, it will stop.)
•
Even if the recorder is in HOLD mode, operations using the remote control are still available.
HOLD
