Device Management
Use the
Device Management
page to configure the settings for the device management by System
Configuration Program.
System Configuration Program is the application for administrators to centrally manage
Olympus device profiles. If you use Wireless Communication Service in conjunction with
System Configuration Program, you can distribute device profiles and firmware to DS-9500
devices via the network.
For more information, refer to the reference manual of System Configuration Program.
•
DS-9500 checks whether the updated device profile is available when turning the power
on or entering into power save mode.
•
DS-9500 checks whether the firmware update is available when turning the power off.
Enable device management by SCP
Select this check box to enable the device management feature.
SCP Server address
Type the URL of System Configuration Program in the format http(s)://<
IP address
>:<
port number
>.
Click the
Connection Test
button to check whether Wireless Communication Service can connect to
System Configuration Program.
Logging
Use the
Logging
page to change the logging settings.
Enable logging
Select this check box to enable logging.
Path
Click the
Browse
button
and select location of log files.
