background image

2

Thank you for purchasing the Olympus
Digital Voice Recorder DS-320. Before
using your new recorder, read this manual
carefully to ensure that you know how to
operate it safely and correctly. Keep this
manual in an easily accessible location for
future reference.

• The warning symbols indicate important

safety related information. To protect yourself
and others from personal injury or damage
to property, it is essential that you always
follow the warnings and information provided.

For Safe and
Correct Usage

General Precautions

Do not leave the recorder in hot, humid
locations such as inside a closed automobile
under direct sunlight or on the beach in the
summer.

Do not store the recorder in places exposed
to excessive moisture or dust.

Do not use organic solvents such as alcohol
and lacquer thinner to clean the unit.

Do not place the recorder on top of or near
electric appliances such as TVs or
refrigerators.

Avoid sand or dirt. These can cause
irreparable damage.

Avoid strong vibrations or shocks.

Do not disassemble, repair or modify the
unit yourself.

Do not operate the unit while operating a
vehicle (such as a bicycle, motorcycle, or
go-cart).

Keep the unit out of the reach of children.

Do not use the unit aboard aircraft, in
hospitals, or in other areas where its use is
prohibited.

The copyrights for the “DSS Player” software and
instruction manual are held by Olympus Optical Co., Ltd.
IBM, PC/AT and ViaVoice are the trademarks or
registered trademarks of International Business
Machines Corporation.
Microsoft and Windows are registered trademarks
of Microsoft Corporation.
Intel and Pentium are registered trademarks of Intel
Corporation.
Macintosh and Apple are registered trademarks of
Apple Computer, Inc.
Other product and brand names mentioned herein
may be the trademarks or registered trademarks of
their respective owners.

Summary of Contents for DS320 - Digital Voice Recorder





























































Reviews: