58
EN
5
Focusing and shoo
ting functions
This function lets you take pictures using the self-timer. You can set the camera to release
the shutter after either 12 or 2 seconds. Fix the camera securely on a tripod for self-timer
shooting.
For the setting method, see “Sequential shooting” (
g
P. 57).
Press the shutter button all the way.
• When
Y
12s
is selected:
First, the self-timer lamp lights up for approximately
10 seconds, then it blinks for approximately 2
seconds and the picture is taken.
• When
Y
2s
is selected :
The self-timer lamp blinks for approximately 2
seconds, and then the picture is taken.
• To cancel the activated self-timer, press the
j
/
Y
/
<
button.
x
Notes
• Do not press the shutter button while standing in front of the camera; this could result in the
subject being out of focus since focusing is performed when the shutter button is pressed
halfway.
Eyepiece cover
When shooting without looking through the viewfinder, attach the eyepiece cover to the
viewfinder to prevent the light entering the viewfinder from changing the exposure. Attach the
eyepiece cover after removing the eyecup as illustrated. The same applies when replacing
with an optional eyecup.
By using the optional remote control (RM-1), you can take a picture with yourself in it or a
night scene without touching the camera.
The camera can be set to release the shutter either right away or 2 seconds after the shutter
button on the remote control is pressed. Bulb shooting is also possible when using the
optional remote control.
For the setting method, see “Sequential shooting” (
g
P. 57).
Self-timer shooting
Remote control shooting
Self-timer lamp
Eyecup
Eyepiece cover
s0018_e_00_0_unified.book Page 58 Tuesday, March 18, 2008 4:08 PM
