background image

E

0

42

9

376

 

· 3

0

0 · 0

2

/1

4 · P

R

ENDOCAPSULE 10 SYSTEM

How to register patient information

Q&A

Enter required patient information. Minimum 
requirements are indicated by red * marks 
and red numbers.
Click “Save & New” to continue registering. 
Click “Save & Close” to return to main screen.

Note: In order to send patient messages, 
register from Patient Guidance tab.

What is the recommendation for patient clothing?

Wear thin clothing without any metal. Wearing a top or bottom with 
buttons or zippers is not recommended to avoid un-preferable effects 
for the antenna.

If the recorder is removed from the cradle accidentally during 
initialization or downloading, will the data be affected?

If the process is canceled, place the recorder on the cradle again and 
restart the workstation. The data transfer may be interrupted, but the 
data will be protected. 

How long does it take to recharge the battery?

It takes about two hours. The green light will tell you when the battery 
has finished charging. 

How to initialize the recorder

How can I recognize when the battery needs to be replaced?

A message “Need new battery soon” will be displayed on the recorder. 
Be sure to replace it before the message “Replace Battery” pops up.

Why does the display on the recorder disappear? 

The display light will turn off to save battery power after 30 seconds 
without operation.

How do I clean the equipment?

The antenna unit holder and recorder holder can be machine-washed. 
Be sure to let them dry naturally and completely. Other equipment 
such as the antenna unit, recorder, cradle and capsule activator should 
have their surfaces wiped immediately after use with 70% ethyl or 
isopropyl alcohol.

Specifications, design, and accessories are subject to change without any notice or obligation on the part of the manufacturer.

Postbox 10 49 08, 20034 Hamburg, Germany
Wendenstrasse 14–18, 20097 Hamburg, Germany
Phone: +49 40 23773-0, Fax: +49 40 237765
www.olympus-europa.com

Schedule Exam

Save & New

Save & Close

OK

Initialize recorder

New

Reviews: