Frame adapters
The display unit may not fit your head due to excessive
distance between the frames. If this is the case, use the
frame adapters.
The frame adapters allow the distance between frames to
be reduced.
Always use both the left and right frame adapters together.
How to attach
●
Take out the 2 frame adapters from the bag.
●
As shown in the illustration, attach one of the frame
adapters to position
1
, then slide it to position
2
.
●
Attach the other frame adapter to the other frame.
●
To remove, push the inner tab in the direction
3
as
shown in the illustration.
E-16
REMOVING THE DISPLAY UNIT
When removing the display unit, first remove the inner
headphones from your ears.
If you are also wearing eyeglasses, remove the display unit by
holding the left and right arms of the display unit frame with
your fingers while pushing the frame arms of your eyeglasses
upward with your thumbs.
• If the display unit is removed without removing the inner headphones from your ears, the inner
headphone cords will be pulled excessively and may be disconnected.
Product Care
• To clean the display unit and control unit, wipe with a soft, dry cloth. If they are extremely dirty, wipe
with a soft cloth moistened with a solution of neutral detergent. Do not use chemicals such as
thinner, benzine and alcohol.
• Use the provided storage pouch to store the display unit when not in use.
• Do not wrap the display cable around the display unit or apply excessive force to the display cable,
as it may cause the wire in the cable to break.
• Protect the display unit frame from contact with hair liquids, cosmetic products or other chemicals. If
any gets on the frame, wipe it clean with a soft cloth moistened with a solution of neutral detergent. If
the frame is left with these types of chemicals on it, surface cracks may appear.
NOTICE
* 1
*1 With certain eyeglass
designs, the nose pad may
catch the bridge of the
eyeglasses and cause them
to come out together with
the display unit. To avoid
this, remove the display unit
as described above.
Attach
Remove
1
2
3
