1
1
2
2
3
3
4
4
A
A
B
B
REV
SHEET
OF
PN 11275 Olympus FH Illuminator
System Installation Instruction
2
3
2
Wayne Bonin
4/6/2019
Nanodyne Replacement Illuminator for Olympus FH Microscope Installation Instructions: Step 1. Remove old lamp.
Copyright 2019 Nanodyne Measurement Systems. Document authorized for installation of Nanodyne equipment only. www.nano-dyne.com Wayne Bonin 651-323-8592
(1)
Microscope with OEM lamp and power supply.
(2)
Pull out the OEM lamp. It is just held in by friction.
(3)
Lamp removed. Note that the inner portion of the lamp mount can move in and out when
the thumb screw is loosened.
(3)
The small screw
(inset at left) needs to
be removed to install
the Nanodyne
illuminator.
Use a small jewelers
screwdriver. The
screw is on the inside,
opposite the hole the
red arrow points to.
