APPLIED OPERATIONS
/Image Acquisition
OPERATION INSTRUCTIONS
2 - 8 0
Page
3. [Group] (which means each laser) and the <
> or <
> buttons appear on the lower
part of each [CH] group box.
4. Set the group number according to the reagent in use with the <
> or <
> buttons.
This setting is not required if the desired number is already displayed.
Image acquisition starts with the smallest group number set.
To prevent unwanted color fading, it is recommended to acquire the image
from the reagents with longer wavelengths.
5.
Click the <Seq. Once> button to acquire the image.
6. When transmitted observation is also attempted, the [FLUOVIEW] dialog box and the
[Lasers] sub-panel appear to specify the laser type which has not been specified yet.
Fig. 2-24 [FLUOVIEW] Dialog Box
Click to increase
the acquired group
No.
Click to decrease the
acquired group No.
Shows the group to
be acquired.
TIP
NOTE
