APPLIED OPERATIONS
/Saving, Opening and Shredding Images
OPERATION INSTRUCTIONS
2 - 1 2 5
Page
2-3-1-5 File Types Available for Save
The file type used for saving image in a file can be selected by the user. See section 2-3-1-
1, “Saving Images As a Series” for the operation method.
1.
Click the <Experiment> button in the [Save] group box.
2.
Select the file type from the [Save as Type:] drop-down list in the [Save Experiment As]
dialog box. Three file types are available as detailed below.
•
Fluoview
Multi
Tiff(*.tif):
TIFF format designed for use with
FLUOVIEW.
Used for image analysis, processing, etc., on
FLUOVIEW.
•
Single TIF(s) 8-bit(*.tif):
•
Single TIF(s) 16-bit Gray Scale(*.tif):
TIFF (Tagged-Image File Format) is used for
•
Single TIF(s) 24-bit(*.tif):
image exchange between applications or
computers.
(Three types including the 8-bit, 16-bit and
24-bit types areavailable.)
•
Bitmap 8-bit(*.bmp):
•
Bitmap 24-bit(*.bmp):
The BMP format is the standard raster format
of MS-Windows.
(Two types including the 8-bit and 24-bit
types are available.)
In the file types above, characters inside ( ) indicate the extension when a file is
saved.
When saving a display, the file format can be selected from Single TIF(s)
8-bit (*.tif), Single TIF(s) 16-bit (*.tif), Single TIF(s) 24-bit (*.tif), Bitmap 8-bit
(*.bmp) and Bitmap 24-bit (*.bmp).
When saving an image obtained by merging more than one channel, use a
24-bit file type.
TIP
NOTE
NOTE
