APPLIED OPERATIONS
/ Protocol processor
OPERATION INSTRUCTIONS
2 - 1 6 0
Page
2-4-2-2 Command List
The list of macro commands is shown below.
When “Command” is selected in column [Mode] in the [PAPP] window, enter the macro
command to be carried out for the track. The macro command to be entered can be selected
from the drop-down list. And enter each value directly using keyboard.
Command
Entry form
Description
Append
Append
[FloderName]
[ ,AppendFileName]
[ ,T/Z/AN]
[ ,Date/Name]
It appends images that exist in the same folder
into one file.
[FolderName]: Specify the folder that holds a
file to be appended. The default is
[C:FLUOVIEW¥Images].
[AppendFileName]: Specify the file name
which use after append. The default is
[Append_Year/Month/Day].
[T/Z/AN]: Specify the appended image data
type from T series image, Z series image or
animation image. The default is T series.
[Date/Name]: Specify the order of append,
date or name. The default is date.
CopyROI
CopyROI
Copies active ROI of FLUOVIEW image into
memory in the track is in use.
Dye
Dye string1
[ ,string2][ ,string3]
[ ,string4]
It selects dye methods that use String 1 to 4. 4
kinds – 1 to 4 - can be set. Dye colors that can
be selected are of the ones displayed in
dyeing method when [Dyes] sub panel of
[Acquire] panel on FV300/500/1000 is opened.
Fluorescent reagents are set in sequence of
reagent set in [string].
<E.g> In case that FITC and Cy5 are selected
as dye method, enter [Dye FITC, Cy5].
EnCh
EnCh
Ch , [ON/OFF]
It sets Valid/Invalid of each channel. In Ch,
channel number is designated. Depending
upon system configuration, max. 5 channels
can be selected. When the channel
