APPLIED OPERATIONS
/Viewing 3D Image
OPERATION INSTRUCTIONS
2 - 3 1 0
Page
2-9-2 Animation
Images composed of multiple image slices acquired by varying the multiple sections (XYZ
observation, XYZT observation) can be built into animation image, which can be displayed in
3D by rotating images.
1.
Display the image window of the image composed of multiple image slices.
2.
When the images were acquired in the multi-channel mode, select whether animation is
built from images of more than one channel or from an image of only one channel.
To select the target channel(s), use the <Display channel switch> buttons. Only the
channel(s) being displayed will be used in the animation building.
Example) When only the Ch1 image is displayed, only the Ch1 image is used.
For the switching of channels, see section 2-5-3, “Switching the Display
Channels”.
3.
Click the [Arbitrary View] option button in the [Rendered View] group box.
4.
Click the [Brightest] or [Sum] option button in the [Method] group box.
5.
Select the image rotation direction from the [Standard Views] drop-down list.
6.
Click the [Initial view] option button.
7.
Set the angle at which the rotation should start using the [Initial Rotation Angle] scale.
8.
Click the [Sequence views] option button.
9.
Set the angle per rotation step using the [Rotation Angle Increment] scale.
<Display channel switch>
buttons
TIP
