32
4-3 Reflected light brightfield/darkfield simultaneous observation
Observation
Select the observation light path.
Place a sample on the stage.
Engage the 10X objective in the light path.
Bring the sample into focus.
Set the main switch to (ON).
Adjust the aperture diaphragm and the field diaphragm.
(Fully open the aperture diaphragm during darkfield observation.)
Adjust the brightness.
Adjust the brightness.
Engage the objective with the magnification to be used
in the light path and bring the sample into focus.
Remove the analyzer, polarizer or
filter sliders from the light path.
Select the brightfield (BF) observation.
Set the MIX slider for reflected light observation.
MIX slider for reflected light observation
P.38
Brightness control knob
P.22
Aperture diaphragm lever
P.26
Field diaphragm lever
P.27
Interpupillary distance adjustment scale P.23
Diopter adjustment ring
P.23
Brightness control knob
P.22
Adjust the interpupillary distance.
Adjust the diopter.
Stage plate
P.19
X-axis/Y-axis knobs
P.19
Revolving nosepiece
P.20
Main switch
P.16
BF/DF selection lever
P.17
Eyepiece/camera light path selection
knob
P.18
Operation part
Page
Revolving nosepiece
P.20
Coarse/Fine focusing knobs P.21
Coarse/Fine focusing knobs P.21
Light path selection knob on trinocular tube
or Observation/SP selection knob on the
side port