1
GX53
Introduction
Configuration of instruction manuals
Read all instruction manuals provided with the units you purchased.
The following instruction manuals are prepared for the units to be used with this product.
Manual names
Main contents
Inverted system metallurgical microscope
(this instruction manual)
Reflected light brightfield observation, reflected light darkfield
observation, reflected light differential interference contrast observation,
reflected light simple polarization observation and transmitted light
illumination observation
BX3M-CB/CBFM
Control box/FM Control box
Control box (BX3M-CBFM)
U-RFL-T power supply for mercury burner /
U-RX-T power supply for xenon burner
Connection of the mercury lamp housing with the power supply
TH4 power supply for halogen bulb
Connection of the halogen lamp housing with the power supply
GX-SLM Scale slider
Scale slider (GX-SLM)
U-LGPS LED and LDP light source
Connection of the LED and LDP light source with the liquid light guide, etc.
BX3M-PSLED LED power supply
LED power supply for transmitted light illumination
This microscope employs the UIS2 optical systems. If you use an eyepiece, objective or condenser, etc. together with
this microscope, be sure to use those of UIS2 optical system series.
Using inappropriate units restricts the performance.
(There are other units usable with the UIS series. Contact Olympus or refer to the latest catalogs.)
Intended use
This product is designed to observe magnified images of samples for industrial applications.
Appropriate samples include semiconductors, electrical components, molded parts or mechanical parts.
Industrial applications include observation, inspection or measurements.
Do not use this product for any purpose other than its intended use.
