![background image](http://html2.mh-extra.com/html/olympus/ix71/ix71_installation-manual_4105522002.webp)
Last update: 2021/09/23 17:15
olympus_ix71_zdrive_install https://asiimaging.com/docs/olympus_ix71_zdrive_install
https://asiimaging.com/docs/
Printed on 2022/01/10 05:45
Threaded diameter of ASI’s 3 mm drive shaft
Threaded diameter of ASI’s 4 mm drive shaft
The following tools are required for this procedure:
1/16” Allen wrench (provided)
5/64” Allen wrench (provided)
3/32” Allen wrench (provided)
7/64” Allen wrench (provided)
The procedure has three parts:
Removing the left fine focus knob
1.
Installing flexible coupling
2.
Installing and aligning the motor drive assembly and baseplate.
3.
Installing the cover.
4.
Note: the terms ‘left’ and ‘right’ refer to the sides of the microscope as viewed from the
front of the microscope.