55
Fig. 77
Fig. 78
Universal Condenser (U-UCD8)
(Figs. 77 & 78)
<<
Attaching onto the UCD Adapter
>>
1. Using the Allen screwdriver, loosen the two setscrews
1
on the IX-ADUCD
UCD adapter. (Fig. 77)
2. Push in the U-UCD8 universal condenser horizontally into the adapter
until the condenser’s positioning pin fits into the positioning groove on
the mount dovetail.
3. Tighten the two setscrews
1
using the Allen screwdriver. (Fig. 77)
<<
Attaching onto the Illumination Column
>>
1. Rotate the condenser height adjustment knob
2
to raise the condenser
to the upper limit position. (Fig. 78)
2. Loosen the condenser clamping knob
3
. (Fig. 78)
3. Insert the mount of the UCD adapter into the mount dovetail of the con-
denser holder (the condenser turret should be positioned on the right
hand side). Push the UCD adapter horizontally into the condenser holder
until the condenser’s positioning pin fits into the positioning groove on
the mount dovetail.
4. Tighten the condenser clamping knob
3
. (Fig. 78)
<<
Optical element indices
>>
The optical element indices attached on the U-UCD8 are not visible
because the U-UCD8 is used upside down. Make your own reminder
such as a list of the optical elements inserted in the turret.
With the U-UCD8 (T2), however, the inserted optical elements can be
identified using the provided number stickers/indication plates.
1
2
3
