47
Reco
rd
in
g
1
Connect the line-in cable to your m:robe and the external audio device.
2
Press the
button while the playback screen is displayed.
3
Press the
button to select “REC Source,” then press the
button.
4
Press the
button to select “Line in,” then press the
button.
5
In playback stop mode, play the external audio device, then press and
hold the
button.
Recording starts.
To pause/resume recording
Press the
button.
To stop recording
Press the
button.
Recording over Line-in connection
USB
To the audio (Line-out)
jack of an external audio
device
MRF10_E.book Page 47 Wednesday, July 13, 2005 4:44 PM