DMTA-10040-01EN, Rev. E, February 2018
Appendix A
336
Eddy current
specifications
Probe types
Absolute and differential, in either bridge or
reflection configuration. The instrument is fully
compatible with NORTEC PowerLink probes, as
well as other main probe and accessory
suppliers.
Probe connectors
16-pin LEMO and BNC
Balancing
Internal automatic balancing for BNC connector
(absolute probes)
Number of probe
inputs
1
Frequency range
10 Hz to 12 MHz
Gain
0 dB to 100 dB in 0.1 dB or 1 dB increments
Rotation
0° to 359.9° in 0.1° or 1° increments
Sweep
Variable from 0.005 s to 10 s per division (total of
13.3 divisions with FINE grid)
Low Pass filter
10 Hz to 2000 Hz and wide band
High Pass filter
Off or 2 Hz to 1000 Hz, user-selectable in
constant Figure 6 or Figure 8 filter type
Continuous null (very
low frequency high-
pass filter)
0.2 Hz, 0.5 Hz, and 1.0 Hz
Probe drive
LOW, MEDIUM and HIGH (2 volts, 5 volts, and
8 volts)
Automatic Lift-Off
Yes
Variable persistence
0.1 s to 10 s
Variable display erase
0.1 s to 60 s
Display modes
Single Impedance, Sweep (strip chart), and Split
Screen.
Table 8 General and environmental specifications
(continued)
Category
Parameter
Value
Summary of Contents for nortec 600
