background image

23 

Maintaining the R1018 

 

To maintain your R1018 in good working 
condition: 

 

 Do not scratch the screen. Use the supplied 

Stylus or plastic-tipped pens intended for use 
with a touch-sensitive screen. Never use a 
pen or pencil or other sharp object on the 
screen. 

 Although your R1018 is water and dust 

resistant, do not expose it to rain or moisture 
for an extended period of time. Treat your 
R1018 as you would for a pocket calculator 
or other electronic instrument. 

 The touch-sensitive screen of your R1018 

contains glass. Do not drop your R1018 or 
subject it to a strong impact. 

 

Protect your R1018 from temperature 
extremes. Do not leave it on the dashboard 
of a car on a hot day, and keep away from 
heat sources. 

 Do not store or use your R1018 in any 

location that is extremely dusty, damp or wet. 

 If the surface of the R1018 screen becomes 

soiled, clean it with a soft cloth moistened 
with a diluted window-cleansing solution. 

 R1018 should be strictly kept within 20±5 °C 

temperature range if you want to store it for a 
period of 6 months and beyond, otherwise 
the battery may be permanently damaged.  
This is due to the limitation of the lithium ion/ 
polymer battery. 

 
 

Summary of Contents for R1018 series





































Reviews:

Related manuals for R1018 series