Playing back pictures on a TV
103
6
Pl
ayback
2
Turn the TV on, and set it to video input mode.
• For details of switching to video input, refer to your TV’s instruction manual.
3
Press the POWER button to turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to select
the picture you want to display.
• The camera’s monitor stays off.
You can select [NTSC] or [PAL] according to your TV’s video signal type. Use this
setting when playing back pictures on a TV in a foreign country. Select the [VIDEO
OUT] signal before connecting the AV cable. If you select the wrong video signal
type, you will not be able to play back the recorded pictures properly on the TV.
Top menu
[MODE MENU]
[SETUP]
[VIDEO OUT]
[NTSC] / [PAL]
g
“Using the menus” (P. 17)
• For album playback mode: Top menu
[ALBUM MENU]
[VIDEO OUT]
[NTSC] / [PAL]
TIPS
• The close-up playback, index display and slideshow functions can also be used
on a TV screen.
• You are recommended to use the optional AC adapter when playing back
pictures on a TV.
Note
• Make sure that the camera’s video output signal is the same as the TV’s video
signal.
g
“Video output” (P. 103)
• Be sure to use the provided AV cable to connect the camera to the TV.
• The picture may appear off-center on the TV screen.
Video output
TIPS
TV video signal types by country/region
Check the video signal type before connecting the camera to the TV.
NTSC North America, Taiwan, Korea, Japan
PAL
European countries, China