45
EN
Adjust the settings for the functions while referring to “Using the Menu” (p. 3).
Resetting the
fi
le name numbers of
pictures [FILE NAME]
E
SETUP
X
FILE NAME
Month: 1 to C
(A=October,
B=November,
C=December)
Day: 01 to 31
Pmdd
Folder name
Folder name
File name
DCIM
100OLYMP
999OLYMP
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering
Automatic
numbering
Submenu 2
Application
RESET
This resets the sequential number
for the folder name and
fi
le name
whenever a new card is inserted.
*1
This is useful when grouping
images on separate cards.
AUTO
Even when a new card is inserted,
this continues the numbering for
the folder name and
fi
le name from
the previous card. This is useful for
managing all image folder names
and
fi
les names with sequential
numbers.
*1
The number for the folder name is reset to 100, and
the one for the
fi
le name is reset to 0001.
Adjusting the CCD and adjusting the
image processing function
[PIXEL MAPPING]
E
SETUP
X
PIXEL MAPPING
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
To adjust the CCD and the image
processing function
Press the
o
button when [START]
(Submenu 2) is displayed.
The camera checks and adjusts the CCD and the
image processing function at the same time.
●
