17. The shutter assembly is next, but it is unlikely there is a problem with it. So you’re finished! Just retrace your
steps to reassemble everything, working your way backwards thru the cups in the ice cube tray. A little graphite
between the aperture ring and the focus ring will make these move smoothly. Some graphite on the rewind shaft
will work wonders, too. Always make sure to rub the graphite into the surface, then blow away any extra. Be sure
to clean the viewfinder and the “Judas window” before replacing the top. You can put the cleaning cloth over a Q-
tip to clean the inside of the viewfinder. And don’t forget to position the front lens element per the mark you made
in step “7”, so the camera will focus correctly.
Now load it up with your favorite film and take some pictures!
