Olympus U-D7RES, Instructions Manual

4

CODED FUNCTION SYSTEM

2

SYSTEM CHART

 ·

Entrust the assembly and adjustments of the modules marked

*

 to Olympus.

The connectors of the U-CBS are sealed with dust covers. Remove the dust covers only from the connectors 
you want to connect cables.

 ·

Be sure to connect the module designated by Olympus to each connector. If a non-designated module is 
connected, the performance of the entire system cannot be guaranteed.

 ·

Before connecting the cables, make sure that the POWER switch of the U-CBS control box is set to OFF (out 
position).

  Hold each connector in the appropriate orientation and insert it all the way into the connector. If a connector 

is provided with clamping screws, be sure to tighten them.

 ·

Do not insert a non-designated connector. Otherwise, the connector may be damaged.

CAUTION

Coded Fluorescence 
Illuminator 

*

BX3-RFAS

Microscope Frame
BX43F
BX53F

Control Box for Coded Units 

Note 3)

U-CBS

U-D7RES connector 

Note 2)

BX3-RFAS connector 

*

 Note 2)

Microscope 
Digital Camera
DP21

RS-232C cable 

Note 1)

Option connector

AC adapter

U-HSEXP connector

Note 4)