background image

68

EN

Olympus, at its sole discretion, will repair, replace, or adjust 
the defective Product, provided that Olympus investigation and 
factory inspection disclose that (a) such defect developed under 
normal and proper use and (b) the Product is covered under this 
limited warranty.
Repair, replacement, or adjustment of defective Products shall 
be Olympus’s sole obligation and the customer’s sole remedy 
hereunder.
The customer is liable and shall pay for shipment of the 
Products to the Olympus Service Center.
Olympus shall not be obligated to perform preventive 
maintenance, installation, deinstallation, or maintenance.
Olympus reserves the right to (i) use reconditioned, refurbished, 
and/or serviceable used parts (that meet Olympus’s quality 
assurance standards) for warranty or any other repairs and (ii) 
make any internal or external design and/or feature changes 
on or to its products without any liability to incorporate such 
changes on or to the Products.

WHAT IS NOT COVERED BY THIS LIMITED 
WARRANTY

Excluded from this limited warranty and not warranted by 
Olympus in any fashion, either express, implied, or by statute, 
are:
(a) products and accessories not manufactured by Olympus 

and/or not bearing the “OLYMPUS” brand label (the 
warranty coverage for products and accessories of other 
manufacturers, which may be distributed by Olympus, is the 
responsibility of the manufacturers of such products and 
accessories in accordance with the terms and duration of 
such manufacturers’ warranties);

(b) any Product which has been disassembled, repaired, 

tampered with, altered, changed, or modi

fi

 ed by persons 

other than Olympus’s own authorized service personnel 
unless repair by others is made with the written consent of 
Olympus;

(c) defects or damage to the Products resulting from wear, tear, 

misuse, abuse, negligence, sand, liquids, impact, improper 
storage, nonperformance of scheduled operator and 
maintenance items, battery leakage, use of non-“OLYMPUS” 
brand accessories, consumables, or supplies, or use of the 
Products in combination with non-compatible devices;

(d) software programs;
(e) supplies and consumables (including but not limited to 

lamps, ink, paper, 

fi

 lm, prints, negatives, cables and 

batteries); and/or

(f)  Products which do not contain a validly placed and recorded 

Olympus serial number, unless they are a model on which 
Olympus does not place and record serial numbers.

EXCEPT FOR THE LIMITED WARRANTY SET FORTH 
ABOVE, OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER 
REPRESENTATIONS, GUARANTIES, CONDITIONS, AND 
WARRANTIES CONCERNING THE PRODUCTS, WHETHER 
DIRECT OR INDIRECT, EXPRESS OR IMPLIED, OR ARISING 
UNDER ANY STATUTE, ORDINANCE, COMMERCIAL USAGE 
OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY 
WARRANTY OR REPRESENTATION AS TO THE SUITABILITY, 
DURABILITY, DESIGN, OPERATION, OR CONDITON OF 
THE PRODUCTS (OR ANY PART THEREOF) OR THE 
MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS 
FOR A PARTICULAR PURPOSE, OR RELATING TO THE 
INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER 
PROPRIETARY RIGHT USED OR INCLUDED THEREIN.
IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF 
LAW, THEY ARE LIMITED IN DURATION TO THE LENGTH OF 
THIS LIMITED WARRANTY.
SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR 
LIMITATION OF WARRANTIES AND/OR LIMITATION OF 
LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS 
MAY NOT APPLY.
THE CUSTOMER MAY ALSO HAVE DIFFERENT AND/OR 
ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM 
STATE TO STATE.
THE CUSTOMER ACKNOWLEDGES AND AGREES THAT 
OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY 
DAMAGES THAT THE CUSTOMER MAY INCUR FROM 
DELAYED SHIPMENT, PRODUCT FAILURE, PRODUCT 
DESIGN, SELECTION, OR PRODUCTION, IMAGE OR DATA 
LOSS OR IMPAIRMENT OR FROM ANY OTHER CAUSE, 
WHETHER LIABILITY IS ASSERTED IN CONTRACT, TORT 
(INCLUDING NEGLIGENCE AND STRICT PRODUCT LIABILITY) 
OR OTHERWISE. IN NO EVENT SHALL OLYMPUS BE LIABLE 
FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL OR 
SPECIAL DAMAGES OF ANY KIND (INCLUDING WITHOUT 
LIMITATION LOSS OF PROFITS OR LOSS OF USE), WHETHER 
OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF 
THE POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE.

Representations and warranties made by any person, including 
but not limited to dealers, representatives, salespersons, or 
agents of Olympus, which are inconsistent or in con

fl

 ict with 

or in addition to the terms of this limited warranty, shall not be 
binding upon Olympus unless reduced to writing and approved 
by an expressly authorized of

fi

 cer of Olympus.

This limited warranty is the complete and exclusive statement of 
warranty which Olympus agrees to provide with respect to the 
Products and it shall supersede all prior and contemporaneous 
oral or written agreements, understandings, proposals, and 
communications pertaining to the subject matter hereof.

Summary of Contents for VG-160













































































Reviews: