59
EN
• If you fi nd that the USB-AC adapter is extremely hot or
notice any unusual odors, noise, or smoke around it,
unplug the power plug from wall outlet immediately and
stop using it. Then, contact an authorized distributor or
service center.
CAUTION
• Stop using the camera immediately if you notice any
unusual odors, noise, or smoke around it.
•
Never remove the batteries with bare hands, which may
cause a fi re or burn your hands.
•
Never hold or operate the camera with wet hands.
• Do not leave the camera in places where it may be subject
to extremely high temperatures.
•
Doing so may cause parts to deteriorate and, in some
circumstances, cause the camera to catch fi re. Do not use
the charger or USB-AC adapter if it is covered (such as a
blanket). This could cause overheating, resulting in fi re.
• Handle the camera with care to avoid getting a low-
temperature burn.
•
When the camera contains metal parts, overheating can
result in a low-temperature burn. Pay attention to the
following:
•
When used for a long period, the camera will get hot. If you
hold on to the camera in this state, a low-temperature burn
may be caused.
•
In places subject to extremely cold temperatures, the
temperature of the camera’s body may be lower than the
environmental temperature. If possible, wear gloves when
handling the camera in cold temperatures.
• Be careful with the strap.
•
Be careful with the strap when you carry the camera. It could
easily catch on stray objects and cause serious damage.
•
To protect the high-precision technology contained in this
product, never leave the camera in the places listed below, no
matter if in use or storage:
•
Places where temperatures and/or humidity are high or go
through extreme changes. Direct sunlight, beaches, locked cars,
or near other heat sources (stove, radiator, etc.) or humidifi ers.
•
In sandy or dusty environments.
•
Near fl ammable items or explosives.
•
In wet places, such as bathrooms or in the rain. When using
products with weatherproof designs, read their manuals as well.
•
In places prone to strong vibrations.
•
Never drop the camera or subject it to severe shocks or vibrations.
•
When attaching the camera to or removing it from a tripod,
rotate the tripod screw, not the camera.
•
Before transporting the camera, remove a tripod and all other
non-OLYMPUS accessories.
•
Do not touch electric contacts on cameras.
•
Do not leave the camera pointed directly at the sun. This may
cause lens or shutter curtain damage, color failure, ghosting on
the image pickup device, or may possibly cause fi res.
•
Do not push or pull severely on the lens.
•
Before storing the camera for a long period, remove the
batteries. Select a cool, dry location for storage to prevent
condensation or mold from forming inside the camera. After
storage, test the camera by turning it on and pressing the
shutter button to make sure that it is operating normally.
•
The camera may malfunction if it is used in a location where
it is subject to a magnetic/electromagnetic fi eld, radio waves,
or high voltage, such as near a TV set, microwave, video
game, loud speakers, large monitor unit, TV/radio tower, or
transmission towers. In such cases, turn the camera off and on
again before further operation.
•
Always observe the operating environment restrictions
described in the camera’s manual.
Battery Handling Precautions
Battery Handling Precautions
Follow these important guidelines to prevent
batteries from leaking, overheating, burning,
exploding, or causing electrical shocks or burns.
DANGER
•
The camera uses a lithium ion battery specifi ed by Olympus.
Charge the battery with the specifi ed USB-AC adapter or
charger. Do not use any other USB-AC adapters or chargers.
•
Never heat or incinerate batteries.
•
Take precautions when carrying or storing batteries to prevent
them from coming into contact with any metal objects such as
jewelry, pins, fasteners, etc.
•
Never store batteries where they will be exposed to direct
sunlight, or subjected to high temperatures in a hot vehicle,
near a heat source, etc.
•
To prevent causing battery leaks or damaging their terminals,
carefully follow all instructions regarding the use of batteries.
Never attempt to disassemble a battery or modify it in any
way, solder, etc.
Summary of Contents for VH-410
Page 70: ......
Page 71: ...VM543001 ...
