2
16
EN
a
b
c
d
R
e
cording
1
Select the recording folder
(
☞
P.15).
2
Press
the
REC
(
s
) button to start
recording.
• Turn the microphone in the direction
of the source to be recorded.
Before starting recording, select a folder
among [
&
] to [
*
]. These five folders can be
selectively used to distinguish the kind of
recording; for example, Folder [
&
] might
be used to store private information, while
Folder [
'
] might be dedicated to holding
business information.
Recording
• [
Rec Mode
] cannot be changed in
the recording standby mode or while
recording. Configure this while the
recorder is stopped (
☞
P.29).
a
Recording mode
indicator
b
Elapsed recording time
c
Remaining recording
time
3
Press
the
STOP
(
4
) button to
stop recording.
d
File length
Notes
• To ensure recording from the beginning,
start recording after you see the display
and the LED indicator light on.
• When remaining recording time is less
than 60 seconds, the LED indicator light
starts flashing. When the recording time
is decreasing to 30 or 10 seconds, the
light flashes faster.
• [
Folder full
] will appear when the
recording cannot be made any further.
Select other folder or delete unnecessary
files before recording (
☞
P.25).
• [
Memory full
] will appear when the
memory is full. Delete unnecessary files
before recording any further (
☞
P.25).
For VN-406PC:
• When a microSD card is inserted in the
recorder, be sure to confirm the recording
media as either [
Internal memory
]
or [
microSD card
] so that there is no
mistake (
☞
P.34).
• If a recording is made in stereo modes
([
192 kbps
] or [
128 kbps
]), it will be a
monaural recording through the built-in
microphone, and the same audio will be
recorded to both Left channel (Lch) and
Right channel (Rch).
About recording
