83
5
To enable alarm sound only
To set an alarm without audio playback, set
the alarm while an empty folder is selected.
• Start setting from step 3 (
☞
P.81) of “Alarm
Playback Function”.
• When alarm sound goes at the preset time,
pressing any button stops the sound.
Alarm Playback Function (ALARM)
Notes
• The alarm playback function can be set for only
one file at a time.
• The alarm will sound at the scheduled time every
day unless the alarm playback setting is cleared.
• If you wish to change the file for alarm play, first
turn the alarm settings “OFF”, then make any
desired new alarm settings.
• The alarm will sound for 5 minutes and then stop.
• If the recorder is in use at the scheduled time, the
alarm will sound after the operation is finished.
• The alarm will sound at the scheduled time even
if the recorder is set to hold. The recorder begins
to play the file associated with the alarm when
you press any button.
• The alarm playback setting is cleared if the
selected file is erased.
• For the audio playback as an alarm, the selected
file will play regardless of the mode (Voice/Music).
