4
Recording menu [R
ec Menu]
41
EN
Recording menu [Rec Menu]
Reducing noise caused by rubbing
during recording [Anti-Rustle]
Reduce noise caused by the voice recorder
rubbing against clothing (rustling sounds)
when recording in your pocket.
NOTE
•
When recording with
the voice recorder in a
pocket or alike, secure it
with a clip to prevent if
from moving.
[
High
] [
Low
]:
Reduces noise caused by rubbing
sounds (rustling sounds) during
recording.
[
OFF
]:
Turns the rustling sound reduction
function off.
Start recording after the set time
has elapsed [Self-timer]
Self-timer function starts recording after the
set time has elapsed. By setting the time until
recording starts in advance, you can prevent
forgetting to record.
[
3 min.
][
5 min.
][
10 min.
]:
Sets the time until recording starts.
[
OFF
]:
Turn off the self-timer.
Reducing noise during recording
[Low Cut Filter]
The voice recorder’s low cut filter function
lets you make recordings that reduce
humming sounds from air-conditioners or
low-frequency sounds from equipment such
as projectors.
[
ON
]:
Turns the low cut filter ON.
[
OFF
]:
The low cut filter is disabled.
Voice-activated recording function
[VCVA]
The voice-activated recording function
(VCVA) automatically starts recording when
a sound louder than a preset voice activation
level is detected, and automatically pauses
recording when the sound volume level
falls. Use this function to automatically omit
unneeded quiet segments when recording
(such as long silences during conferences),
saving memory.
[
ON
]:
Turns VCVA ON. You can adjust the
voice activation level used for VCVA.
[
OFF
]:
Turns VCVA OFF. Restores standard
recording.
