background image

E-34

After-sale Service

●You  will  receive  the  guarantee  card  from  your  dealer.  Please  make  sure

that  the  dealer's  name,  the  date  of  purchase,  etc.  have  been  entered.  If
they  have  not  been  entered,  immediately  ask  your  dealer  to  have  them
entered. Read the guarantee conditions carefully and keep the guarantee
card at a safe location.

●Please contact your dealer or one of the service stations of our company

listed in this instruction manual for questions on after-sale service for this
product or in case of defects. In case of a defect of this product, occurring
within one year after the date of purchase and with handling according to
this  instruction  manual,  repair  based  on  the  conditions  specified  in  the
guarantee card is performed free of charge.
Payment is required for repairs after expiration of the guarantee period and
for  trouble  caused  by  problematic  handling  by  the  customer  even  during
the guarantee period.

●Our  company  keeps  repair  parts  for  this  product  for  approximately  five

years  after  the  end  of  production  of  the  product.  Accordingly,  in  principle
repairs  are  accepted  during  this  period.  As  repair  may  be  possible  even
after  this  period,  please  contact  your  dealer  or  a  service  station  in  your
neighborhood.

●Warranty is limited to and valid only in the region of intended distribution .
●Incidental  damages  from  defects  of  this  product  (expenses  required  for

diving,  shooting  expenses,  loss  of  profit  from  photos,  etc.)  shall  be
excluded from the guarantee. In addition, transport expenses etc. related
to repair shall be paid by the customer, independent of whether they are
incurred during or after the guarantee period.

Summary of Contents for Waterproof Case PT-17







































Reviews: