Page 76 of 76
Issue 20 : July 2012
WM--P1 SERIES WORKSTATIONS
SUMMARY OF CHANGE HISTORY
Issue No.
Change
Request No.
Date
Effective
Brief description of change(s)
17
01663
August 2010
This manual has been re--issued in its entirety at issue 17 to incorporate some
changes to the content and change the format of the manual.
Format
: The page number stream has been modified to run consecutively. The
Page Issue Index has been removed. The Amendment Log has been replaced by
Change of Issue Log, page 2. Summary of Change History has been added as the
last page of the manual.
Chapter 6 Part Replacement
Page 25 Scope pole clamp identified as an assemby.
Chapter 7 Illustrated Parts List
Page 32 Scope pole clamp identified as an
assemby.
Page 33 Transformers that are ‘Spare with Packaging’ added. Components of
Scope pole clamp assemby added. Page 34 Scope pole clamp assemby item
number changed from 30 to 46.
Chapter 8 Accessories Illustrated Parts List
Page 39 MAJ--1635 EUS Connector
Holder added to table of contents. Page 75 New page containing -- MAJ--1635 EUS
Connector Holder.
18
02846
October 2011
Update to procedure of Castor replacement. Add ‘Run a M12 tap through the castor
fixing hole to clear any residual Loctite adhesive’ to section 6.6, Castor
Replacement. Add ‘M12 Tap’ to chapter 4, Tools and Test Equipment.
Future up--issues will be controlled by Engineering Change Order (ECO)
Issue No.
ECO No
Date
Effective
Brief description of change(s)
19
101332
February 2012
Chapter 8 Accessories Illustrated Parts List
Section 8.3 figure 8--3 Finger pull
and fixings deleted.
Parts List -- Finger pull and fixings deleted.
-- Changed -- part numbers of :
item 6 Keyboard Clamp
Item 7 Keyboard Clamp.
20
Castor
torque
settings as
detailed in
101451
applicable to
WM--P1
101400
July 2012
Chapter 5 Test and Inspection
Page 15 of 76
Changed, castor tightening torque figure with Castor spanner tool from 38 to 30Nm.
Added, torque figure of 38Nm when Castor spanner tool not used.
Chapter 6.6 Castor replacement
Page 19 of 76
Changed, castor tightening torque figure with Castor spanner tool from 38 to 30Nm.
Added, torque figure of 38Nm when Castor spanner tool not used.
Chapter 7 Illustrated Parts List
Figure 7--7 Page 32 of 76
Added, 30Nm to caster annotation.
Page 33 of 76,
Deleted, from items 3 & 4, 38Nm from Torque column.
Added, BB in Remarks column.
Page 38 of 76
Added, Remark BB.
Chapter 8 Accessories Illustrated Parts List
Section 8.12 Page 55 of 76
Changed, typographic error.
Section 8.26 Page 74 of 76
Changed, Plug block which includes adaptor brackets.
