WS-210S
- 9 -
- 9 -
s
The recording time shown above is for one continuous file. The available recording time
may be shorter than specified if several files are recorded. (Use the remaining time and
recorded time only as references.)
s
Stereo XQ
,
Stereo HQ
and
Stereo SP
is only available for the WS-210S.
Recording Modes (Rec Mode)
The recording mode can be chosen from
Stereo XQ
(stereo extra high
quality sound recording),
Stereo HQ
(stereo high quality sound recording),
Stereo SP
(stereo standard recording),
HQ
(high quality sound recording),
SP
(standard recording), and
LP
(long-term recording).
Current recording
mode
s
WS-210S is set to Stereo HQ by default.
s
WS-110 is set to HQ by default.
Microphone Sensitivity (Mic Sense)
Microphone sensitivity is adjustable to meet your recording needs.
In Menu mode selection
Conferences(
), Dictation(
)
: High-sensitivity mode that records sounds in all directions.
: Low-sensitivity mode suited for dictation.
s
To ensure successful recording, make a test recording to choose appropriate microphone
sensitivity before recording.
s
If you choose “Conferences”, we recommend setting the recording mode to Stereo XQ,
Stereo HQ, Stereo SP or HQ to best take advantage of the higher sensitivity.
s
If you choose “Conferences”, background noise may be high depending on the recording
conditions.
➜
1
Press the
9
or
0
button adjust the pause sound level.
The VCVA level can be set to any of 15 different values. The higher the
value, the more sensitive the recorder to sounds. At the highest value,
even the faintest sound will activate recording.The VCVA pause sound
level can be adjusted according to the ambient (background) noise.
a
VCVA Level
b
Start level (moves to the right/left according to the set level)
s
The record/play indicator light is lit during recording. When the recorder is in Standby mode, the
record/play indicator light flashes and
flashes on the display.
s
The start/stop actuation level also varies depending on the selected microphone sensitivity mode.
s
If the starting level is not adjusted within 2 seconds, the display will return to the previous.
➜
Using The Variable Control Voice Actuator (VCVA)
When the microphone senses that sounds have reached a preset threshold
volume level, the built-in Variable Control Voice Actuator (VCVA) starts
recording automatically, and stops when the volume drops below the
threshold level.The VCVA feature extends recording time and conserves
memory by stopping recording during silent periods, which helps the playback
to be more efficient.
In Menu mode selection
VCVA OFF, VCVA ON
➜
Set the LowCut Filter (LowCut)
The recorder has a LowCut Filter function to minimize low-frequency sounds
and record voices more clearly. This function can reduce noise from air
conditioners, projectors and other similar noises.
In Menu mode selection
LowCut OFF, LowCut ON
LowCut Filter indicator
➜
Voice Filter indicator
VCVA indicator
HQ:
Approx.17 hours 35 minutes
SP:
Approx.34 hours 40 minutes
LP:
Approx.69 hours 00 minutes
Stereo XQ:
Approx.8 hours 50 minutes
Stereo HQ:
Approx.x17 hours 40 minutes
Stereo SP:
Approx.35 hours 25 minutes
HQ:
Approx.35 hours 25 minutes
SP:
Approx.69 hours 40 minutes
LP:
Approx.138 hours 30 minutes
WS-110
Display in the stereo
recording mode
Microphone
sensitivity display
Set the Voice Filter (Voice Filter)
The recorder has a Voice Filter Function to cut low and high frequency tones
during normal, fast, or slow playback, and enable clear audio playback.
In Menu mode selection
Voice OFF, Voice ON
